Information about VAT and Postage

- VAT is 22% by the Portuguese law.
- Postage are not included in the price.
- The shipping cost will be informed once the order is packed.

Triumph TR2 and TR3

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Price table

ID Part Name Price Add to Cart
850 1 Front shroud mild steel TR2 and TR3 REQUIRE d:1 2555.00 8
852 1 Front shroud aluminium TR2 and TR3 REQUIRE d:1 2610.00 8
853 2 Front shroud mild steel TR3A and TR3B REQUIRE d:1 1748.00 8
854 2 Front shroud aluminium TR 3A and TR3A REQUIRE d:1 1915.00 8
855 3 Spire nut ‘U’ Type x1/4”= (No, 12) TR3A and TR3B REQUIRE d:4 0.85 8
856 4 Plain washer 1/4” – outer diameter :1” thickness : 1/16” TRA and TR3B
REQUIRE d: 4
0.51 8
857 5 Screw ¾ x ¼” (12 threads / inch) TR3A and TR3B REQUIRE d:4 0.68 8
858 6 Wing LH Front, mild steel REQUIRE d: 1 865.00 8
859 6 Wing LH Front, aluminium REQUIRE d: 1 880.00 8
860 6 Wing RH Front, mild steel REQUIRE d: 1 865.00 8
861 6 Wing RH Front, aluminium REQURE d: 1 880.00 8
862 7 Fitting Kit front wing REQUIRE d: 2 19.00 8
863 8 Door LH TR 2 To TS4001 – main identifiers: Long doors (To wing bottoms) Without external handles, no outer sills fitted 880.00 8
864 8 Door RH to TS4001 – main identifiers: long doors ( To wing bottoms) Without external handles, no outer sills fitted 880.00 8
865 8 Door LH TR2 from TS4002, TR3 – min identifiers: short doors (to top of Outer sill) without external handles, outer sills fitted 820.00 8
866 8 Door RH TR2 from TS4002, TR3 – min identifiers: short doors (to top of Outer sill) without external handles, outer sills fitted 820.00 8
867 8 Door LH TR3A to TS60000 – main identifiers: wooden top rail and external handles 835.00 8
868 8 Door RH TR3A to TS60000 – main identifiers: wooden top rail and external handles 835.00 8
869 8 Door LH TR3A from TS60001, TR3B – main identifiers: metal Top rail and External handles 835.00 8
870 8 Door RH TR3A from TS60001, TR3B – main identifiers: metal Top rail and External handles 835.00 8
871 9 Wing LH rear, mild steel 755.00 8
872 9 Wing LH rear, aluminium 790.00 8
873 9 Wing RH rear, mild steel 755.00 8
874 9 Wing RH rear , aluminium 790.00 8
875 10 Fitting Kit rear wing REQUIRE d: 2 20.51 8
876 11 Clamp rear wing retaining REQUIRE d: 2 10.55 8
877 12 Bonnet new item, aluminium TR2 to TS4228: man identifiers:4 rear slats 1375.00 8
878 12 Bonnet new item, mild steel TR2 to TS4228: man identifiers:4 rear slats 1260.00 8
879 12 Bonnet new item, mild steel TR2 from TS4229, TR3, TR3A to TS60000: main identifiers : 2 rear slats and holes to accept Dzus Fasteners 1260.00 8
880 12 Bonnet new item , from, TR3A to TS60001: main identifiers : 2 rear slats and holes to accept Dzus Fasteners 1260.00 8
881 13 Scuttle panel with vent lid hole TR2 To TS6156 710.00 8
882 13 Scuttle panel with vent lid hole TR2 To TS6156 775.00 8
883 14 Closing panel ‘B’ post to RH rear Wing 243.00 8
884 14 Closing panel ‘B’ post to LH rear wing 243.00 8
885 15 Decking panel Tonneau saddle TR2 and TR3, TR3A TS60000 402.50 8
886 15 Decking panel tonneau saddle TR3A From TS60001,TR3B 410.00 8
887 16 Boot lid mild steel TR2 and TR3 603.00 8
888 16 Boot lid aluminium TR2 and TR3 760.00 8
889 16 Boot lid mild steel TR3A to TS60000 603.00 8
890 16 Boot lid aluminium TR3A to TS60000 760.00 8
891 16 Boot lid mild steel TR3A from TS60001,TR3B 603.00 8
892 16 Boot lid aluminium TR3A from TS60001,TR3B 760.00 8
893 17 Rear Valance TR2, TR3 to TS18912 720.00 8
894 17 Rear Valance TR3 from TS18913,TR3A and TR3B 830.00 8
895 18 Door spare wheel compartment 410.00 8
896 19 Captive nut ¼” UNF size 11x11 mm 0.96 8
897 20 Captive nut ¼” UNF size 11x11 mm 0.86 8
898 21 Cage for square nut – alongated hole type 1.35 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21

Price table

ID Part Name Price Add to Cart
899 1 Cross Brace New – Behind front shroud 155.00 8
900 2 Screw brace to front shroud-Required (8) each 0.45 8
901 2 Bolt cross brace to inner front wing–Required (4) each 0.80 8
902 3 Shakeproof washer Internal star x1/4” Required (12) each 0.25 8
903 4 Nut ¼” UNF–spanner size: 7/16” Required (12) each 0.16 8
904 5 Splash Shield – in front wing – mild Steel Required (2) each 14.40 8
905 6 Metal plate Required (2) each 3.55 8
906 7 Sealing Rubber–Splash shield top Required (2) each 6.00 8
907 8 Sealing rubber-Splash shield top Required (2) each 4.85 8
908 9 Blind rivet to seal to splash shield Required (10) 1.00 8
909 10 Pointed Screw -Splash shield to bulkhead Required (8) 0.80 8
910 11 Spring washer ¼” 0.16 8
911 12 Plain washer ¼” – outer diameter: ¾”, thickness: 1/16” 0.30 8
912 13 Repair panel LH front wing 135.50 8
913 13 Repair panel RH front wing 135.50 8
914 14 A Post pillar LH 169.50 8
915 14 A Post pillar RH 169.50 8
916 15 Door skin LH TR2 to TS4001- main identifiers: long doors (to wing bottoms) Without external handles, no outer siiis fitted 152.00 8
917 15 Door skin RH TR2 to TS4001- main identifiers: long doors (to wing bottoms) Without external handles, no outer siiis fitted 152.00 8
918 15 Door skin LH TR2 from TS4002, TR3 – main identifiers: short doors (to top of outer sill) without external handles, outer sills fitted 152.00 8
919 15 Door skin RH TR2 from TS4002, TR3 – main identifiers: short doors (to top of outer sill) without external handles, outer sills fitted 152.00 8
920 15 Door skin LH TR3A and TR3B – main identifiers: external handles 170.00 8
921 15 Door skin RH TR3A and TR3B – main identifiers: external handles 170.00 8
922 16 B post pillar LH 172.00 8
923 16 B post pillar RH 172.00 8
924 17 Inner sill LH 154.00 8
925 17 Inner sill RH 154.00 8
926 18 Outer sill LH TR2 from TS4002,TR3, TR3A and TR3B 65.80 8
927 18 Outer sill RH TR2 from TS4002,TR3, TR3A and TR3B 65.80 8
928 19 Captive nut ¼” UNF – size 11x11 mm thickess: 4mm 0.96 8
929 20 Cage for square nut – round hole type 0.86 8
930 21 Cage for square nut – elongate hole type 1.35 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 33 33

Price table

ID Part Name Price Add to Cart
977 1 Inner wing LH front TR2 and TR3 585.00 8
978 1 Inner wing RH front TR2 and TR3 585.00 8
979 1 Inner wing LH front TR3A and TR3B 855.00 8
980 1 Inner wing RH front TR3A and TR3B 855.00 8
981 2 Support bracket wiring loom securing for welding to front inner wing 1.55 8
982 3 Pointed screw wing to inner wing Required: 22 0.85 8
983 4 Plain washer ¼” – outer diameter: ¾”, Thickness: 1/16” Required: 22 0.16 8
984 5 Splash shield in front wing – mild steel Alternatives 14.25 8
985 6 Metal plate splash shield Required: 2 3.55 8
986 7 Sealing Rubber Splash shield side Required: 2 6.75 8
987 8 Sealing Rubber Splash shield top Required: 2 4.95 8
988 9 Blind rivet to seal to splash shield Required: 8 1.00 8
989 10 Pointed screw splash shield to bulkhead Required: 10 0.80 8
990 11 Spring washer ¼” Required: 10 0.16 8
991 12 Plain washer ¼” outer diameter: ¾” thickness:1/16” 0.16 8
992 13 Bulkhead assembly TR2 and TR3, TR3A to TS60000 2550.00 8
993 13 Bulkhead TR3A from TS60001,TR3B 2550.00 8
994 14 Repair panel bulkhead – RH front section 248.50 8
995 15 Repair panel bulkhead – LH front section 248.50 8
996 16 Repair panel bulkhead – center section 305.00 8
997 17 Repair panel bulkhead - RH side section 243.00 8
998 17 Repair panel bulkhead - LH side section 243.00 8
999 18 Bracket wiper motor TR2,TR3 TS12567 35.00 8
1000 18 Bracket wiper motor – new item TR3from TS12568,TR3A and TR3B 35.00 8
1001 19 Screw bracket to bulkhead Required: 3 each 0.75 8
1002 20 Spring washer ¼” Required: 3 each 0.16 8
1003 21 Support panel master cylinder Required: 1 75.55 8
1004 22 Back plate master cylinder support panel 6.00 8
1005 23 Spire nut `U´ type xNo,10 – Size: ½” x 19/32” 0.97 8
1006 24 Self tapping screw panhead – ½” x No,8 0.20 8
1007 25 Stiffener plate scuttle panel, RH 17.95 8
1008 26 Stiffener plate scuttle panel, LH 19.75 8
1009 27 Blanking plate master cylinder pocket 55.00 8
1010 28 Pointed screw ¾” x ¼” UNF Required:14 0.80 8
1011 29 Spring washer ¼” Required: 14 0.16 8
1012 30 Plain washer ¼” - outer diameter: ¾” Thickness: 1/16” 0.16 8
1013 31 Battery box plastic (alternatives) 0.00 8
1014 32 Drain tube boot aperture 65.30 8
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 28 29 30 31 32 33 34 35 36 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

Price table

ID Part Name Price Add to Cart
931 1 Inner sill LH 146.55 8
932 1 Inner sill RH 146.55 8
933 2 `A´post LH 140.75 8
934 2 `A´post RH 140.75 8
935 3 `B´ post LH 166.85 8
936 3 `B´ post RH 166.85 8
937 4 Closing panel `B´ post to LH rear wing - Required 1 237.00 8
938 4 Closing panel `B´ post to RH rear wing - Required 1 237.00 8
939 6 Stay rear wing to wheel arch - Required 2 10.50 8
940 7 Chassis outrigger - Required 4 65.55 8
941 8 Floor panel LH- Required 1 220.00 8
942 9 Floor panel RH- Required 1 220.00 8
943 10 Gearbox tunnel mild steel – Required 1 397.00 8
944 11 Pointed screw ¾ x ¼ UNF – Required 16 each 0.85 8
945 12 Plain washer – ¼ - outer diamerter : ¾ , thickness – Required 16 each 0.16 8
946 13 Reinforcement inner rear bottom Required 1 48.50 8
947 14 Closing panel rear bottom LH inner Required 1 39.50 8
948 14 Closing panel rear bottom RH inner Required 1 39.50 8
949 15 Mounting bracket body to chassis, LH – Required 1 32.00 8
950 15 Mounting bracket body to chassis, RH – Required 1 32.00 8
951 16 Bolt mounting bracket to chassis – Required 2 each 0.80 8
952 17 Plain washer 5/16”- outer diameter: 1” – thickness: 0,057” – Required 2 each 0.16 8
953 18 Spring washer 5/16” – Required 2 each 0.16 8
954 19 Nut 5/16” UNF – Spanner size: ½” each 0.35 8
955 20 Wheel arch LH rear TR2 and TR3,TR3A to TS60000 - Required 1 269.50 8
956 20 Wheel arch RH rear TR2 and TR3,TR3A to TS60000 - Required 1 269.50 8
957 21 Side panel BOOT , LH, TR2 and TR3, TR3A to TS60000 - Required 1 84.50 8
958 21 Side panel BOOT , RH, TR2 and TR3, TR3A to TS60000 - Required 1 84.50 8
959 22 Stiffener boot LH side panel, TR2 and TR3, TR3A to TS60000 - Required 1 39.50 8
960 22 Stiffener boot RH side panel, TR2 and TR3, TR3A to TS60000 - Required 1 39.50 8
961 23 Boot foor TR2 and TR3, TR3A to TS60000 –Required 1 305.00 8
962 24 Spare wheel tray TR2 and TR3, TR3A to TS60000 - Required 1 345.00 8
963 25 Floor panel rear tray TR2 and TR3, TR3A to TS60000 - Required 1 368.00 8
964 26 Transmission tunnel TR2 and TR3, TR3A to TS60000 - Required 1 145.00 8
965 26 Transmission tunnel TR2 and TR3, TR3A to TS60000 - Required 1 145.00 8
966 28 Wheel arch, LH rear TR3A from TS60001, TR3 B - Required 1 269.50 8
967 28 Wheel arch, RH rear TR3A from TS60001, TR3 B - Required 1 269.50 8
968 29 Side panel boot, LH rear TR3A from TS60001, TR3 B - Required 1 69.50 8
969 29 Side panel boot, RH rear TR3A from TS60001, TR3 B - Required 1 69.50 8
970 30 Boot floor TR3A from TS60001, TR3 B - Required 1 335.00 8
971 31 Spare wheel tray TR3A from TS60001, TR3 B - Required 1 345.00 8
972 32 Floor panel ,rear TR3A from TS60001, TR3 B - Required 1 368.00 8
973 33 Transmission tunnel - Required 1 145.00 8
974 34 Captie nut ¼” UNS – size: 11 x 11mm, thickness: 4mm 0.90 8
975 35 Cace for square nut – round hole type 0.86 8
976 36 Cage for square nut – elongated hole type 1.35 8
1 2 3 4 5 6 9 11 11 14 16

Price table

ID Part Name Price Add to Cart
1016 1A Chassi TR2 and TR3 5875.00 8
1017 1 Shield,radiator protection origiginal 30.00 8
1023 2 Cross tube front section Note: includes front apron stay bracket 192.00 8
1024 3 Turret assembly RH Note: includes bump stop bracket and bracket, engine mouting 328.00 8
1025 4 Turret assembly LH Note: includes bump stop bracket and bracket, engine mouting 328.00 8
1026 5 Bracket,rebound RH 45.00 8
1027 5 Bracket,rebound LH 45.00 8
1028 6 Chassis frame assembiy front sction 55.00 8
1029 7 Chassis frame assembly inner wing mounting section RH 55.00 8
1030 8 Chassis frame assembly inner wing mounting section LH 65.00 8
1031 9 Cross member 45.00 8
1032 10 Chassis repair center box section frame 328.00 8
1033 11 Bracket, shock absorber RH 85.00 8
1034 11 Bracket, shock absorber LH 85.00 8
1035 12 Chassis outrigger (eash) 35.00 8
1036 12 Chassis outrigger includes cross tubes(eash) 45.00 8
1037 13 Chassis center section frame 895.00 8
1038 14 Cross tube, rear spring 87.00 8
1039 14A Cross tube rear 45.00 8
1040 14B Chassis repair section rear Note: Repair section includes cross tubes 252.80 8
1041 15 Radiator and sump shield rally type in steel 85.00 8
1042 15A Strip assembly side shield to chassis (eash) 15.00 8
1043 15B Strip assembly rear shield to chassis 15.00 8
1044 15C Radiator and sump shield rally type in aluminium 235.00 8
1045 16 Bracket, rear body mouting RH 35.00 8

Some of the brands we work